日博|体育

<ins id="sdb8x"></ins>

<tt id="sdb8x"><source id="sdb8x"><big id="sdb8x"></big></source></tt>

  • <ins id="sdb8x"></ins>
      <ins id="sdb8x"></ins>

      <u id="sdb8x"></u>
      Home      Log In      Contacts      FAQs      INSTICC Portal
       

      Call for Papers

      ICINCO is sponsored by INSTICC – Institute for Systems and Technologies of Information, Control and Communication

      SCOPE

      The purpose of the 17th International Conference on Informatics in Control, Automation and Robotics (ICINCO) is to bring together researchers, engineers and practitioners interested in the application of informatics to Control, Automation and Robotics. Four simultaneous tracks will be held, covering Intelligent Control Systems, Optimization, Robotics, Automation, Signal Processing, Sensors, Systems Modelling and Control, and Industrial Informatics.

      Informatics applications are pervasive in many areas of Control, Automation and Robotics; This conference intends to emphasize this connection, therefore, authors should highlight the benefits of Information Technology (IT) in these areas. Ideas on how to solve problems using IT, both in R&D and industrial applications, are welcome. Papers describing advanced prototypes, systems, tools and techniques and general survey papers indicating future directions are also encouraged. Papers describing original work are invited in any of the areas listed below. Accepted papers, presented at the conference by one of the authors, will be published in the Proceedings of ICINCO, with an ISBN. Acceptance will be based on quality, relevance and originality. Both full research reports and work-in-progress reports are welcome. There will be both oral and poster sessions.

      Special sessions, dedicated to case-studies and commercial presentations, as well as tutorials dedicated to technical/scientific topics are also envisaged: companies interested in presenting their products/methodologies or researchers interested in holding a tutorial, workshop or special session are invited to contact the conference secretariat or visit the conference website.

      CONFERENCE AREAS

      Each of these topic areas is expanded below but the sub-topics list is not exhaustive. Papers may address one or more of the listed sub-topics, although authors should not feel limited by them. Unlisted but related sub-topics are also acceptable, provided they fit in one of the following main topic areas:

      1. INTELLIGENT CONTROL SYSTEMS AND OPTIMIZATION
      2. ROBOTICS AND AUTOMATION
      3. SIGNAL PROCESSING, SENSORS, SYSTEMS MODELLING AND CONTROL
      4. INDUSTRIAL INFORMATICS


      AREA 1: INTELLIGENT CONTROL SYSTEMS AND OPTIMIZATION


      • Decision Support Systems
      • Distributed Control Systems
      • Engineering Applications on Intelligent Control Systems and Optimization
      • Evolutionary Computation and Control
      • Fuzzy Control
      • Genetic Algorithms
      • Hybrid Learning Systems
      • Intelligent Fault Detection, Diagnosis and Prognostics
      • Knowledge-Based Systems Applications
      • Machine Learning in Control Applications
      • Neural Networks Based Control Systems
      • Optimization Algorithms
      • Planning and Scheduling
      • Soft Computing
      • Software Agents for Intelligent Control Systems

      AREA 2: ROBOTICS AND AUTOMATION


      • Autonomous Agents
      • Cognitive Approach for Robotics
      • Collective and Social Robots
      • Control and Supervision Systems
      • Engineering Applications on Robotics and Automation
      • Guidance, Navigation and Control
      • Human-Machine Interfaces
      • Humanoid Robots
      • Human-Robots Interfaces
      • Image Processing
      • Industrial Networks and Automation
      • Intelligent Transportation Technologies and Systems
      • Mechatronics Systems
      • Mobile Robots and Intelligent Autonomous Systems
      • Modelling, Simulation and Architecture
      • Network Robotics
      • Perception and Awareness
      • Robot Design, Development and Control
      • Space and Underwater Robots
      • Surveillance, Fault Detection and Diagnosis
      • Telerobotics and Teleoperation
      • Vehicle Control Applications
      • Virtual Environment, Virtual and Augmented Reality
      • Vision, Recognition and Reconstruction

      AREA 3: SIGNAL PROCESSING, SENSORS, SYSTEMS MODELLING AND CONTROL


      • Adaptive Signal Processing and Control
      • Biological Inspired Sensors
      • Computer and Microprocessor-Based Control
      • Defect and Change Detection and Identification
      • Engineering Applications
      • Environmental Monitoring and Control
      • Information-Based Models for Control
      • Intelligent Components for Control
      • Mechanical, Force and Tactile Sensors
      • Modelling, Analysis and Control of Discrete-Event Systems
      • Modelling, Analysis and Control of Hybrid Dynamical Systems
      • Nonlinear Signals and Systems
      • Optimization Problems in Signal Processing
      • Real-Time Systems Control
      • Sensors Fusion
      • Signal Reconstruction
      • System Identification
      • System Modelling
      • Time-Frequency Analysis

      AREA 4: INDUSTRIAL INFORMATICS


      • Computer-Based Manufacturing Technologies
      • Energy Efficiency and Green Manufacturing
      • Human Factors & Human-System Interface
      • Industrial Automation and Robotics
      • Industrial Internet of Things
      • Intelligent Design and Manufacturing
      • Manufacturing Systems Engineering
      • Performance Evaluation and Optimization
      • Precision Engineering
      • Production Planning, Scheduling and Control
      • Production Tasks' Design, Planning and Management
      • Quality Control and Management
      • Resources and Knowledge Management in Industry
      • Supply Chain and Logistics Engineering
      • Systems Modelling and Simulation

      KEYNOTE SPEAKERS

      Roland SiegwartAutonomous Systems Lab & Wyss Zurich, ETH Zurich, Switzerland
      Eduardo F. CamachoUniversity of Seville, Spain
      Jean-Michel CoronUniversité Pierre et Marie Curie, France

      PAPER SUBMISSION

      Authors should submit a paper in English, carefully checked for correct grammar and spelling, addressing one or several of the conference areas or topics. Each paper should clearly indicate the nature of its technical/scientific contribution, and the problems, domains or environments to which it is applicable. To facilitate the double-blind paper evaluation method, authors are kindly requested to produce and provide the paper WITHOUT any reference to any of the authors, including the authors’ personal details, the acknowledgments section of the paper and any other reference that may disclose the authors’ identity.

      Only original papers should be submitted. Authors are advised to read INSTICC's ethical norms regarding plagiarism and self-plagiarism thoroughly before submitting and must make sure that their submissions do not substantially overlap work which has been published elsewhere or simultaneously submitted to a journal or another conference with proceedings. Papers that contain any form of plagiarism will be rejected without reviews.

      Authors can submit their work in the form of a Regular Paper, representing completed and validated research, or as a Position Paper, portraying a short report of work in progress or an arguable opinion about an issue discussing ideas, facts, situations, methods, procedures or results of scientific research focused on one of the conference topic areas. All papers must be submitted through the online submission platform PRIMORIS and should follow the instructions and templates that can be found under Guidelines and Templates. After the paper submission has been successfully completed, authors will receive an automatic confirmation e-mail.

      PUBLICATIONS

      All accepted papers will be published in the conference proceedings, under an ISBN reference, on paper and on digital support.
      SCITEPRESS is a member of CrossRef (http://www.crossref.org/) and every paper on our digital library is given a DOI (Digital Object Identifier).
      The proceedings will be submitted for indexation by Thomson Reuters Conference Proceedings Citation Index (CPCI/ISI), DBLP, EI (Elsevier Engineering Village Index), Scopus, Semantic Scholar, Google Scholar and Microsoft Academic.

      SECRETARIAT

      ICINCO Secretariat
      Address: Avenida de S. Francisco Xavier, Lote 7 Cv. C
                   2900-616 Setúbal - Portugal
      Tel.: +351 265 520 185
      Fax: +351 265 520 186
      e-mail: icinco.secretariat@insticc.org
      Web: http://www.www.vsure.net.cn

      VENUE

      Available soon.

      CONFERENCE CO-CHAIRS

      Kurosh MadaniUniversity of Paris-EST Créteil (UPEC), France
      Janan ZaytoonUniversity of Reims Champagne Ardennes, France

      PROGRAM CHAIR

      Oleg GusikhinFord Motor Company, United States

      PROGRAM COMMITTEE MEMBERS

      Srinivasan A, Caledonian College of Engineering, Galsgow Caledonian University, Oman
      Ghassan Abu-Lebdeh, American University of Sharjah, United Arab Emirates
      Andrew Adamatzky, University of the West of England, United Kingdom
      El-Houssaine Aghezzaf, Ghent University, Faculty of Engineering and Architecture, Belgium
      Eugenio Aguirre, University of Granada, Spain
      Rudy Agustriyanto, University of Surabaya, Indonesia
      Qingsong Ai, Wuhan University of Technology, China
      Carlos Aldana, University of Guadalajara, Mexico
      Manuel Aleixandre, Tokyo Institute of Technology, Japan
      Adel Al-Jumaily, University of Technology Sydney, Australia
      Erdinç Altug, Istanbul Technical University, Turkey
      Yacine Amirat, University Paris Est Créteil (UPEC), France
      Mihail Antchev, Technical University - Sofia, Bulgaria
      Rui Araujo, University of Coimbra, Portugal
      Gustavo Arroyo-Figueroa, Instituto Nacional de Electricidad y Energías Limpias, Mexico
      T. Asokan, Indian Institute of Technology Madras, India
      Mohamed Amine Atoui, Lab-STICC, France
      Augusto Luis Ballardini, Universita degli studi di Milano Bicocca, Italy
      Alfonso Baños, Universidad de Murcia, Spain
      Ramiro Barbosa, ISEP/IPP - School of Engineering, Polytechnic Institute of Porto, Portugal
      Guilherme Barreto, Universidade Federal do Ceará, Brazil
      Dennis Barrios-Aranibar, Universidad Católica San Pablo, Peru
      Marcelo Becker, Escola de Engenharia de S?o Carlos, Brazil
      Carsten Behn, Schmalkalden University of Applied Sciences, Germany
      Faïz Ben Amar, Université Pierre et Marie Curie, Institut Systèmes Intelligents et de Robotique, France
      Lyes Benyoucef, Aix-Marseille University, France
      Karsten Berns, University of Kaiserslautern, Germany
      Arijit Bhattacharya, University of East Anglia, United Kingdom
      Reinaldo Bianchi, Centro Universitario da FEI, Brazil
      Mauro Birattari, Université Libre de Bruxelles, Belgium
      Jean-Louis Boimond, ISTIA - LARIS, France
      Magnus Boman, The Royal Institute of Technology, Sweden
      Glen Bright, University of KwaZulu-Natal, South Africa
      Marvin Bugeja, University of Malta, Malta
      Kevin Burn, University of Sunderland, United Kingdom
      Kenneth Camilleri, University of Malta, Malta
      Bin Cao, Hebei University of Technology, China
      Alessandro Casavola, University of Calabria, Italy
      Marco Castellani, University of Birmingham, United Kingdom
      Jaime Cerda, Universidad Michoacana de San Nicolas de Hidalgo, Mexico
      Yuh-Min Chen, National Cheng Kung University, Taiwan, Republic of China
      Albert Cheng, University of Houston, United States
      Paul Christodoulides, Cyprus University of Technology, Cyprus
      Feng Chu, University of Evry Val d'Essonne, France
      Daisuke Chugo, Kwansei Gakuin University, Japan
      Carlos Coello, CINVESTAV-IPN, Mexico
      Armando Colombo, Schneider Electric GmbH, France
      James Conrad, University of North Carolina at Charlotte, United States
      Yechiel Crispin, Embry-riddle Aeronautical University, United States
      Erik Cuevas, Universidad de Guadalajara, Mexico
      José Cunha, University of Trás-os-montes and Alto Douro, Portugal
      Debi Das, Institute Minerals Materials Technology, India
      Manohar Das, Oakland University, United States
      Angel Del Pobil, Universitat Jaume I, Spain
      Kyriakos Deliparaschos, Cyprus University of Technology, Cyprus
      Mingcong Deng, Tokyo University of Agriculture and Technology, Japan
      Guilherme DeSouza, University of Missouri, United States
      Paolo Di Giamberardino, Sapienza University of Rome, Italy
      Alexandre Dolgui, IMT Atlantique, France
      Hans Doran, Zurich University of Applied Sciences, Switzerland
      António Dourado, University of Coimbra, Portugal
      Vasile Dragan, Romanian Academy, Romania
      Venky Dubey, Bournemouth University, United Kingdom
      Ioan Dumitrache, University “POLITEHNICA” of Bucharest, Romania
      Guy Dumont, UBC, Canada
      Richard J. Duro, Universidade Da Coru?a, Spain
      Marc Ebner, Ernst-Moritz-Arndt-Universit?t Greifswald, Germany
      Petr Ekel, Pontifical Catholic University of Minas Gerais, Brazil
      Krystian Erwinski, Institute of Engineering and Technology, Nicolaus Copernicus University Poland, Poland
      Simon Fabri, University of Malta, Malta
      Mohammed Fadali, UNR, United States
      Christophe Farges, Bordeaux University, IMS – UMR 5218 CNRS, France
      Manuel Ferre Perez, Universidad Politecnica Madrid, Spain
      Paolo Fiorini, University of Verona, Italy
      Juan Flores, University of Michoacan, Mexico
      Mauro Franceschelli, Università di Cagliari, Italy
      Georg Frey, Chair of Automation and Energy Systems, Saarland University,, Germany
      Toyomi Fujita, Tohoku Institute of Technology, Japan
      Mauro Gaggero, National Research Council of Italy, Italy
      Iván García Daza, University of Alcalá, Spain
      Maria Garcia-Planas, Universitat Politecnica de Catalunya, Spain
      Wojciech Giernacki, Poznan University of Technology/ Institute of Control, Robotics and Information Engineering, Poland
      Paulo Gil, Universidade Nova de Lisboa, Portugal
      Giuseppina Gini, Politecnico di Milano, Italy
      Luis Gomes, UNL/UNINOVA, Portugal
      Arthur Gómez, Universidade do Vale do Rio dos Sinos, Brazil
      Lucian Grigorie, Military Technical Academy ''Ferdinand I'', Bucharest, Romania
      Mathieu Grossard, Atomic Energy and Alternative Energies Commission, France
      Lech Grzesiak, Warsaw University of Technology, Poland
      Jan Haase, Helmut Schmidt University of the Federal Armed Forces Hamburg, Germany
      Maki Habib, The American University in Cairo, Egypt
      Kensuke Harada, Osaka University, Japan
      Jennifer Harding, Loughborough University, United Kingdom
      Arturo Hernández - Aguirre, Centre for Research in Mathematics, Mexico
      Noelia Hernández Parra, Universidad de Alcalá, Spain
      Yasuhisa Hirata, Tohoku University, Japan
      Wladyslaw Homenda, Warsaw University of Technology, Poland
      Zeng-Guang Hou, Chinese Academy of Sciences, China
      Hesuan Hu, Xidian Univ., China
      Daniela Iacoviello, Sapienza University of Rome, Italy
      Koji Ikuta, University of Tokyo, Japan
      Gianluca Ippoliti, Università Politecnica delle Marche, Italy
      Dmitry Ivanov, Berlin School of Economics and Law, Germany
      Sarangapani Jagannathan, Missouri University of Science and Technology, United States
      Michael Jenkin, York University, Canada
      Myong Jeong, Rutgers University, United States
      Wootae Jeong, Korea Railroad Research Institute, Korea, Republic of
      Isabel Jesus, ISEP/IPP - School of Engineering, Polytechnic Institute of Porto, Portugal
      Márcio José da Cunha, Federal University of Uberlandia, Brazil
      Fabrício Junqueira, University of S?o Paulo (USP), Brazil
      Michail Kalogiannakis, University of Crete, Greece
      Pavan Kumar Kankar, Indian Institute Technology Indore, India
      Tohru Kawabe, University of Tsukuba, Japan
      Rafael Kelly, CICESE Research Center, Mexico
      DaeEun Kim, Yonsei University, Korea, Republic of
      Jonghwa Kim, University of Science & Technology, Korea, Republic of
      George Kovács, Hungarian Academy of Sciences, Hungary
      S. Kozaitis, Florida Institute Technology, United States
      Krzysztof Kozlowski, Poznan University of Technology, Poland
      Ondrej Krejcar, University of Hradec Kralove, Czech Republic
      Masao Kubo, Narional Defense Academy of Japan, Japan
      Kolja Kühnlenz, Coburg University of Applied Sciences and Arts, Germany
      Halina Kwasnicka, Wroclaw University of Technology, Poland
      Sébastien Lahaye, Istia - LARIS, France
      H. Lam, King's College London, United Kingdom
      Kauko Leiviskä, University of Oulu, Finland
      Roland Lenain, Irstea, France
      Fabrizio Leonardi, FEI University, Brazil
      Rory Lewis, University of Colorado, United States
      Tsai-Yen Li, National Chengchi University, Taiwan, Republic of China
      Christos Liambas, , Greece
      Hualou Liang, Drexel University, United States
      Huei-Yung Lin, National Chung Cheng University, Taiwan, Republic of China
      Kai Liu, The University of Liverpool, United Kingdom
      Ángel Llamazares, Universidad de Alcalá, Spain
      ChuKiong Loo, University of Malaya, Malaysia
      Antonio Lopes, University of Porto, Portugal
      Sérgio Lopes, University of Minho, Portugal
      Gonzalo Lopez-Nicolas, Universidad de Zaragoza, Spain
      Ping Lou, Wuhan University of Technology, China
      Yu-Shen Lu, National Taiwan Normal University, Taiwan, Republic of China
      Eric Lucet, CEA -French Alternative Energies and Atomic Energy Commission, France
      Martin Lukac, Nazarbayev University, Kazakhstan
      Danilo Maccio, National Research Council of Italy, Italy
      José Machado, Institute of Engineering, Polytechnic of Porto, Portugal
      Douglas Macharet, Universidade Federal De Minas Gerais, Brazil
      Anthony Maciejewski, Colorado State University, United States
      Ana Madureira, ISEP/IPP, Portugal
      Magdi Mahmoud, King Fahd University of Petroleum and Minerals, Saudi Arabia
      Om Malik, University of Calgary, Canada
      Philippe Martinet, INRIA, France
      Tariq Masood, University of Cambridge, United Kingdom
      Ross McAree, University of Queensland, Australia
      Seán McLoone, Queen's Unviersity Belfast, Ireland
      Wenchao Meng, Carleton University, Canada
      Nadhir Messai, CReSTIC, France
      Konstantinos Michail, Cyprus University of Technology, Cyprus
      Sanya Mitaim, Thammasat University, Thailand
      Dusmanta Kumar Mohanta, Birla Institute Technology Mesra Ranchi, India
      Francesco Morabito, University Mediterranea of Reggio Calabria, Italy
      Vladimir Mostyn, VSB - Technical University of Ostrava, Czech Republic
      Vassilis Moulianitis, University of the Aegean, Greece
      George Moustris, National Technical University of Athens, Greece
      Riccardo Muradore, University of Verona, Italy
      Saeid Nahavandi, Deakin University, Australia
      Cairo Nascimento, Instituto Tecnológico de Aeronáutica, Brazil
      Andreas Nearchou, University of Patras, Greece
      Juan J. Nieto, University of Santiago de Compostela, Spain
      Shimon Nof, Purdue University, United States
      Ivan Nunes da Silva, University of S?o Paulo, Brazil
      Fernando Osorio, USP - Universidade de Sao Paulo, Brazil
      Stamatis Papadakis, University of Crete, Greece
      Ju H. Park, Yeungnam University, Korea, Republic of
      Igor Paromtchik, INRIA, France
      Ignacio Parra-Alonso, University of Alcalá, Spain
      Federica Pascucci, Roma Tre, Italy
      Pierre Payeur, University of Ottawa, Canada
      Dariusz Pazderski, Poznan University of Technology, Poland
      Qingjin Peng, University of Manitoba, Canada
      Fernando Pereira, University of Porto, Portugal
      Carlos Pereira, Federal University of Rio Grande Do Sul - UFRGS, Brazil
      D. Pham, The University of Birmingham, United Kingdom
      Son Phung, University of Wollongong, Australia
      Aurelio Piazzi, Università degli Studi di Parma, Italy
      S. Ponnambalam, University Malaysia Pahang, Malaysia
      Nirvana Popescu, University Politehnica of Bucharest, Romania
      Raul Marin Prades, Jaume I University, Spain
      Radu-Emil Precup, Politehnica University of Timisoara, Romania
      Libor Preucil, Czech Technical University in Prague, Czech Republic
      Xiaobo Qu, Xiamen University, China
      Gobithaasan R.U., University Malaysia Terengganu, Malaysia
      José Ragot, Centre de Recherche en Automatique de Nancy, France
      Muhammad Asif Zahoor Raja, COMSATS University Islamabad, Pakistan
      Akshay Rajhans, MathWorks, United States
      Oscar Reinoso, Miguel Hernandez University, Spain
      Mihailo Ristic, Imperial College London, United Kingdom
      Roseli Romero, University of S?o Paulo, Brazil
      Juha Röning, University of Oulu, Finland
      Hubert Roth, University Siegen, Germany
      António Ruano, University of Algarve, Portugal
      Yassine Ruichek, Université de Technologie Belfort-Montbeliard, France
      Jocelyn Sabatier, IMS Laboratory - Bordeaux University, France
      Christophe Sabourin, IUT Sénart, University Paris-Est Creteil (UPEC), France
      Carlos Sagüés, Universidad de Zaragoza, Spain
      Mehmet Sahinkaya, Kingston University London, United Kingdom
      Priti Sajja, Sardar Patel University, India
      Antonio Sala, Universidad Politecnica de Valencia, Spain
      Addisson Salazar, Universitat Politècnica de València, Spain
      Abdel-Badeeh Salem, Ain Shams University, Egypt
      VEERA RAGAVAN Sampath Kumar, , Malaysia
      Marcello Sanguineti, University of Genoa, Italy
      Nilanjan Sarkar, Vanderbilt University, United States
      Jurek Sasiadek, Carleton University, Canada
      Daniel Sbarbaro, Universidad de Concepcion, Chile
      Daniel Schmidt, SEW EURODRIVE GmbH, Germany
      Gerald Seet, Nanyang Technological University, Singapore
      João Sequeira, Instituto Superior Técnico, Portugal
      Roman Sergienko, Gini GmbH, Germany
      Madhavan Shanmugavel, SRM Institute of Science and Technology, India
      Jinhua She, Tokyo University of Technology, Japan
      Bijan Shirinzadeh, Monash University, Australia
      Michael Short, Teesside University, United Kingdom
      Manuel Silva, ISEP-Instituto Superior de Engenharia do Porto, Portugal
      Carlos Silvestre, University of Macau, China, and Instituto Superior Técnico, Universidade de Lisboa, Portugal, China
      Vasile Sima, National Institute for Research & Development in Informatics, Romania
      Dan Simon, Cleveland State University, United States
      Daniel Simon, INRIA, France
      Arpita Sinha, IIT Bombay, India
      Adam Slowik, Koszalin University of Technology, Poland
      Andrzej Sluzek, Khalifa University, United Arab Emirates
      Gustavo Soares, PUC-MG, Brazil
      Stefano Squartini, Università Politecnica delle Marche, Italy
      J. Stigter, Wageningen University, Netherlands
      Olaf Stursberg, University of Kassel, Germany
      Raúl Suárez, Universitat Politecnica de Catalunya (UPC), Spain
      Les Sztandera, Jefferson (Philadelphia University + Thomas Jefferson University), United States
      Tianhao Tang, Shanghai Maritime University, China
      Tomasz Tarczewski, Nicolaus Copernicus University, Poland
      Abdelhamid Tayebi, Lakehead University, Canada
      Hakan Temeltas, Istanbul Technical University, Turkey
      Daniel Thalmann, Ecole Polytechnique Federale de Lausanne, Switzerland
      Gui Tian, Newcastle University, United Kingdom
      Geetam Tomar, Machine Intelligence Research Labs, India
      Germano Torres, PS Solutions, Brazil
      Wa-Muzemba Tshibangu, Morgan State University, United States
      Nikos Tsourveloudis, Technical University of Crete, Greece
      Ali Turgut, Middle East Technical University, Turkey
      José Valente de Oliveira, Universidade do Algarve, Portugal
      Roberto Valenti, MathWorks, United States
      Antonis Vardulakis, Aristotle University of Thessaloniki, Greece
      César Vargas Rosales, ITESM - Monterrey, Mexico
      Ramiro Velazquez, Universidad Panamericana, Mexico
      Douglas Vieira, ENACOM, Brazil
      Hugo Vieira Neto, Federal University of Technology - Paraná, Brazil
      Arnoud Visser, Universiteit van Amsterdam, Netherlands
      Ljubo Vlacic, Griffith University, Australia
      Damir Vrancic, Jo?ef Stefan Institute, Slovenia
      Bernardo Wagner, Leibniz Universit?t Hannover, Germany
      Feng Wan, University of Macau, Macau
      Peiliang Wang, Huzhou University, China
      Qian Wang, Manhattan College, University of Iowa, United States
      Jingyu Wang, Northwestern Polytechnical University (NPU), China
      Long Wang, Peking University, China
      Warren White, Kansas State University, United States
      Min Wu, China University of Geosciences, China
      Farouk Yalaoui, University of Technology of Troyes, France
      Qinmin Yang, Zhejiang University, China
      Qiangda Yang, Northeastern University, China
      Weiwei Yu, Northwestern Polytechnical University, China
      Marek Zaremba, Université du Québec (UQO), Canada
      Jie Zhang, Newcastle University, United Kingdom
      Primo Zingaretti, Università Politecnica delle Marche, Italy
      Alois Zoitl, Johannes Keppler University, Austria
      Ming Zuo, University of Alberta, Canada

      (list not yet complete)

      footer

      <ins id="sdb8x"></ins>

      <tt id="sdb8x"><source id="sdb8x"><big id="sdb8x"></big></source></tt>

    1. <ins id="sdb8x"></ins>
        <ins id="sdb8x"></ins>

        <u id="sdb8x"></u>

        手机在线娱乐赌博平台

        点击进入优游

        3星彩票

        信发的彩的登陆

        大红鹰国际

        90vs比分足球

        智胜彩票

        lol电竞投注-首页

        乐虎官网